Skip to Store Area:


TTD-03.1 Indoor Box Tripod

Double click on above image to view full picture

Zoom Out
Zoom In

Colours & Coatings

TTD-03.1 Indoor Box Tripod


The top cover of this box tripod turnstile is made of artificial stone and radio-transparent for concealed mounting of proximity card readers inside the housing. The reader operation zone on the top cover is colour-marked; the operation range is not less than 80 mm.

The turnstile is operated from the remote control panel and features 6 operating modes used for bi-directional single or multiple passages.

After each passage the barrier arms are automatically returned to home position. Smoothness of reset is ensured by the damper.

Call Me

  • built-in control unit

  • bi-directional passage control

  • high flow rate

  • LED directional indicators

  • cable or wireless remote control panel

  • integration with most identification and access control systems

  • fire alarm control input to unlock the turnstile by alarm signal

  • anti-panic folding arms (optional)

  • automatic reset of barrier arms after each passage

  • key override to unlock the turnstile in case of emergency

  • safe supply voltage

  • low power consumption

  • simple installation with anchor fixtures


This product is certified and complies with the European (EC) standards.
Download the Declaration of Conformity

Turnstile Housing Steel with high quality powder coating or stainless steel
Operating Modes 6
Key Override Yes
Function Bidirection
Drive n/a
Colour(s) Polished Stainless Steel
Dark Grey
Starlit Night
Other colours available Powder coating to colour of choice (according to RAL) is available
Anti-panic folding arms The turnstile can be supplied with anti-panic arms (optional).
Power Failure The turnstile is powered from a regulated power supply unit 12V DC @1A (ordered separately).

If the power supply fails, the turnstile retains the set position for each direction, i.e. the open passage direction remains open, and the closed passage direction remains closed.

An uninterruptible power supply (UPS) is required to secure off-line operation of the turnstile (ordered separately).
Timeout Facility The turnstile has a pre-set timeout period
Interface The TTD-03.1 turnstile is controlled via the control logic board (CLB) placed inside the turnstile housing
Control Mechanism Components Operation of the turnstiles is controlled by an electro-mechanical assembly located under the top cover.
Control over Turnstile Control over the turnstile can be carried out in either pulse or potential control mode. In both modes the control signal is applied to the CLB connector block contacts.
Status/Direction Light Indication Two LED directional indicators with bright pictograms are located on the top cover as standard.
Turnstile Housing: steel with high quality powder coating or stainless steel
Tripod Hub: mild steel, black painted
Barrier Arms (standard and anti-panic): polished AISI 304 stainless steel tube (3 mm) with plastic end caps
Top Cover artificial stone (dark blue or black colour available)
Usage Indoor
Operational Voltage 12v DC
Throughput Rate 30 persons/min
Temperature Range +1°C to +40°C
Passage Width 500 mm
Dimensions (LxWxH)
Housing: 1000x1083x260 mm
Housing (with Barrier Arms): 1000x1083x684 mm
Download Full Specification Click here to download specification sheet
Installation Example

Scotstoun Leisure Centre, Glasgow

Installation Example

Renaissance Plaza, St Petersburg

Installation Example

Grupo Transhotel Lobby, Madrid

Installation Example

Swimming Pool Entrance